Component Compatibility Guide |
||||||
No | Orifice |
CFM Range |
Machine Capacity |
Minimum Pipe ID |
Blast Hose ID |
Minimum Air Hose ID |
3 | 3/16" | 45-81 | 2 ft³ | 1" | 3/4" | 1" |
4 | 1/4" | 81-137 | 2 ft³ | 1" | 1" - 1-1/4" | 1-1/4" |
5 | 5/16" | 137-196 | 4 ft³ | 1" | 1" - 1-1/4" | 1-1/4" |
6 | 3/8" | 196-254 | 6 ft³ | 1-1/4" | 1-1/4" | 1-1/2" |
7 | 7/16" | 254-338 | 6 ft³ | 1-1/4" | 1-1/4" - 1-1/2" | 2" |
8 | 1/2" | 338-548 | 6 ft³ | 1-1/4" | 1-1/2" | 2" |
Guide to Blasting Nozzle Selection
Long venturi style nozzles yield about a 40% greater production rate than straight bore nozzles. The internally tapered design of the venturi nozzle accelerates and evenly distributes the abrasive over the entire blast pattern. These nozzles are designed for use with a 1" I.D. blast hose for maximum cutting action on hard-to-clean surfaces.
TLVE-AP Series
- Thread style: 1-1/4 - 11-1/2 NPSM
- Recommended where low price point is most important
- Polyurethane jacket
- Polyurethane threads
- Competitive price without sacrificing quality
Model Number | Bore Diameter | Length |
TLVE-3AP | 3/16 | 4-1/2 |
TLVE-4AP | 1/4 | 5-1/2 |
TLVE-5AP | 5/16 | 6 |
TLVE-6AP | 3/8 | 7 |
TLVE-7AP | 7/16 | 8-1/4 |
TLVE-8AP | 1/2 | 9-1/4 |